Buff Rake

Cleans old compound from buffs instantly. Just hold against the spinning buff to clean out unwanted or excess material that would otherwise gall the s... more

Buff Shop Dust Mask

Buff Shop Dust Mask... more

Combo Buffing Kit Double Wide Stainless Steel

This double wide stainless steel buffing kit contains the wheels and buffing compounds needed to bring dull stainless steel trim to a like new shine. ... more

Face Shield With Ratcheting Headgear

Protective Face Shield... more

Mini Anvil

The perfect size for intricate trim restoration when a full-sized anvil is too big for the work piece. This is not a toy, but a scaled-down version of... more

Mini Anvil And Trim Hammer Set

Both the Trim Hammer (#13146) and the Mini-Anvil (#13031) are the perfect size for intricate trim work. The Mini-Anvil weighs 1/2 pounds, and measures... more

Tapered Mandrel 3/4 1-1/2

This convenient tapered mandrel fits buff motor part numbers 13006, 13069, 13280, 13281, 13307. Threads onto the end of the right hand motor shaft on ... more

Trim Hammer

Trim Hammer Makes Dent Repair Simple. It really is suited for fine trim repair. Use the face to remove dents in flat stainless trim and the cross pein... more

13 Ply Thick Buff 8x1/2 Sisal

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated sisal buffs work faster, longer than non-treated buffs. Suitable for faster mat... more

2 1/2" X 2 1/2" Tapered Buff w/Mandrel

Mag Wheel Tapered Buff with Mandrel - This 2-1/2 wide by 2-1/2 long tapered mag wheel/goblet buff includes it's own attached 1/4 mandrel. Commonly use... more

2" X 2" Tapered Buff w/Mandrel

Mag Wheel Tapered Buff with Mandrel - This 2 wide by 2 long tapered mag wheel/goblet buff includes it's own attached 1/4 mandrel. Commonly used with T... more

80 Ply Thick Buff 10X3/4 Sewn

This buff lasts twice as long as our (13038) 10 Spiral Sewn 40 ply wheel while the 1 wide face speeds results on wider surfaces. Concentric stitching ... more

80 Ply Thick Buff 6X1/2 Sewn

This buff lasts twice as long as our (13034) 6 Spiral Sewn 40 ply wheel while the 1 wide face speeds results on wider surfaces. Concentric stitching h... more

80 Ply Thick Buff 8x1/2 Loose

An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton dis... more

80 Ply Thick Buff 8X3/4 Sewn

This buff lasts twice as long as our (13033) 8 Spiral Sewn 40 ply wheel while the 1 wide face speeds results on wider surfaces. Concentric stitching h... more

Buff Bob Assortment Mini Cones

Mounted on sturdy steel shanks, these felt buffing bob assortments really get into the tight spots. Great for putting the final touches on intricate p... more

Buff Bob Mini Cylinder Assortment

Mounted on sturdy steel shanks, these felt buffing bob assortments really get into the tight spots. Great for putting the final touches on intricate p... more

Buff Bobs 1/4" Shank 5 pc Kit

Mounted on sturdy steel shanks, these felt buffing bob assortments really get into the tight spots. Great for putting the final touches on intricate p... more

Buff Compound Emery 17 oz Tube

Contains Emery Grit - Very fast cutting action. For coarse buffing, removing scratches and burrs from iron and other hard metals. Use with sisal buff.... more

Buff Cone Tapered 2 Inch Felt

Made of medium hard felt 2 long. Mounted on a 1/4 mandrel. Maximum 15,000 rpm. Use our Mini Buffing Bob Assortment (13055) a 10 pc set of cylinder and... more

Buff Goblet Tapered

Made of cotton, sewn and trimmed to a cone shape. Diameter at base is 2 1/2, extends 2 1/2 to a 1 diameter point. Use the Buff Taper for 1/4 Drill Chu... more

Buff Taper For 1/2-20 Threaded Motor Shaft

Buff Taper For 1/2-20 Threaded Motor Shaft... more

Buff Taper For 1/4 Inch Drill Chucks

Buff Taper For 1/4 Inch Drill Chucks... more

Buff Wheel 10 Inch Canton 3/4 Inch Hole

An extra-soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all the buffs. Made of the f... more

Buff Wheel 10 Inch Loose 1/2 Inch Hole

An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton dis... more

Buff Wheel 10 Inch Loose 3/4 Inch Hole

An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton dis... more

Buff Wheel 10 Inch Sisal 1/2 Inch Hole

Natural, woven fiber covered with cotton and spiral sewn. Used for steel, iron and stainless metals. Sisal is fast cutting and aggressive. Use with Em... more

Buff Wheel 10 Inch Sisal 3/4 Inch Hole

Natural, woven fiber covered with cotton and spiral sewn. Used for steel, iron, and stainless metals. Sisal is fast cutting and aggressive. Use with E... more

Buff Wheel 10 Inch Spiral

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting on all materials. Made from selected white cotton material with continuou... more

Buff Wheel 10 Inch Spiral 3/4 Inch Hole

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting on all materials. Made from selected white cotton material with continuou... more

Buff Wheel 10" Loose 80 ply 3/4" Hole

This buff lasts twice as long as our (13041) 10 Loose Section 40 ply wheel while the 1 wide face speeds results on wider surfaces. Use this wheel with... more

Buff Wheel 10" Ventilated 3/4" Hole

The flap design of these Buffs keeps your work piece cooler, reducing the risk of warping. The flaps tend to slap the part, resulting in cutting actio... more

Buff Wheel 10" Yellow Spiral With 1/2" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 10" Yellow Spiral With 3/4" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 10" Yellow Ventilated 3/4" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 3 Inch Diameter

Cushion sewn for flexibility. 1/2 wide with 1/2 arbor hole. Use with the wheel arbor Adapter (13064) with your drill or 1/4 collet in your die grinder... more

Buff Wheel 4 Inch Canton 1/2 Inch Hole

An extra-soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all buffs. Made of the fines... more

Buff Wheel 4 Inch Loose

An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton dis... more

Buff Wheel 4 Inch Spiral

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting on all materials. Made from selected white cotton material with continuou... more

Buff Wheel 4" Yellow Treated Spiral Sewn 1/2" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 6 Inch Canton 1/2 Inch Hole

An extra soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all the buffs. Made of the f... more

Buff Wheel 6 Inch Loose

An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton dis... more

Buff Wheel 6 Inch Sisal 1/2 Inch Hole

Natural, woven fiber covered with cotton and spiral sewn. Used for steel, iron and stainless metals. Sisal is fast cutting and agressive. Use with Eme... more

Buff Wheel 6 Inch Spiral

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting all materials. Made from selected white cotton material with continuous s... more

Buff Wheel 6 Inch String 1/2 Inch Hole

Bring side markers, turn signals, tail light lenses to shiney, like-new condition. Thousands of 1 3/4 long cotton strands reach deep into details to g... more

Buff Wheel 6 Inch String 3/4 Inch Hole

This 3/4 arbor 6 String Buff will bring side markers, turn signals, tail light lenses to shiny, like-new condition. Thousands of 1 3/4 long cotton str... more

Buff Wheel 6" Ventilated 1/2" Hole

The flap design of these Buffs keeps your work piece cooler, reducing the risk of warping. The flaps tend to slap the part, resulting in cutting actio... more

Buff Wheel 6" Yellow Treated Spiral Sewn 1/2" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 6" Yellow Treated Ventilated 1/2" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 8 Inch Canton 1/2 Inch Hole

An extra-soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all the buffs. Made of the f... more

Buff Wheel 8 Inch Loose

An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton dis... more

Buff Wheel 8 Inch Sisal 1/2 Inch Hole

Natural, woven fiber covered with cotton and spiral sewn, used for steel, iron and stainless metals. Sisal is fast cutting and aggressive. Use with Em... more

Buff Wheel 8 Inch Spiral

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting on all materials. Made from selected cotton material with continuous spir... more

Buff Wheel 8" Ventilated 1/2 Arbor Hole

The flap design of these Buffs keeps your work piece cooler, reducing the risk of warping. The flaps tend to slap the part, resulting in cutting actio... more

Buff Wheel 8" Yellow Treated Spiral Sewn 1/2" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Buff Wheel 8" Yellow Treated Ventilated 1/2" Hole

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Facer Buff 1" Diamter w/1/4" Mandrel

Get in Tight With These Buffs. THese unique buffs will help you reach into deep recessed areas on your project. Great to use when the area is too larg... more

Facer Buff 2" Diameter w/1/4" Mandrel

Get in Tight With These Buffs. THese unique buffs will help you reach into deep recessed areas on your project. Great to use when the area is too larg... more

Facer Buff 3" Diameter w/1/4" Shank

Get in Tight With These Buffs. THese unique buffs will help you reach into deep recessed areas on your project. Great to use when the area is too larg... more

Mini Buff 1 "

Use for small parts buffing. Supplied with a pinhole center. Cotton sewn material. Works well with Buffing Compounds.... more

Mini Buff 1 1/2 in Yellow Treated

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Mini Buff 1 1/2"

Mini Buff 1 1/2"... more

Mini Buff 1" Yellow Treated

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Mini Buff 2 "

Use for small parts buffing. Supplied with a pinhole center. Cotton sewn material. Works well with the Buffing Compounds.... more

Mini Buff 2" Yellow Treated

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Mini Buff Set

Use for small parts buffing. Supplied with a pinhole center. Cotton sewn material. Works well with buffing compounds.... more

Mini Buff Set - Yellow Mill Treated 12 pc

Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material ... more

Mushroom Buff 3 1/2 in w/ 1/4 in Mandrel

Get in Tight With These Buffs. The fine-weave cotton of this mushromm-shaped buff works faster than conventional felt bobs and also lasts longer. The ... more

Mushroom Buff Sisal 3 1/2in w/ 1/4in Mandrel

Mushroom Sisal Buff - Use this sisal buff for aggressive buffing inside recessed areas. 3-1/4 diameter face mounted to composite base with 1/4 mandrel... more

Pad Pk Set 1 Wool & 2 Foam w/Backingpad

Tri-Pak includes: 2 foam pads, 1 wool pad, and 1 backing plate. Backing plate is 7-1/4 Diameter, 5/8x11 Thread Wool Pad is 100% natural, 7-1/2 Diamete... more

Polishing Ball 6" Round

Polishing Ball - Keep bare aluminum wheels, diamond plate and more shining without allot of hand labor. The 6 by 3 thick Buffing Ball made from soft I... more

Set of 3 Bullet Bobs

Medium Felt Bobs - Hard enough for good cutting action, soft enough to shape to the surface. Sold in 4 popular profiles. All bobs measure 3/4 dia., by... more