3/16 " Air Riveter
Air Powered Rivet
Gun - Use this 3/16 capacity rivet gun for fast fatique
free rivet installation. Requires about 2 cfm at 90-120
psi. Includes 3/16, ... more
|
Abrasive Paper 50Pk 2 And 3/4 By
17 And 1/2 240 Gt
Abrasive Paper 50Pk
2 And 3/4 By 17 And 1/2 240 Gt... more
|
Abrasive Paper 50Pk 2 And 3/4 By
17 And 1/2 36Grit
Abrasive Paper 50Pk
2 And 3/4 By 17 And 1/2 36Grit... more
|
Abrasive Paper 50Pk 2 And 3/4 By
17 And 1/2 80Grit
Abrasive Paper 50Pk
2 And 3/4 By 17 And 1/2 80Grit... more
|
Abrasive Paper 50Pk 2.75 X 17.5
Inch 40 Grit
2 3/4 x 17 1/2 sheets
(50 sheets per pack)... more
|
Acorn Lite' N Boltz Polished (2
pack)
Struck by a Lite'n
Bolt Lite'n Bolts are illuminated stainless steel mounting
bolts that can be used in a multitude of locations on your
ride. A trick... more
|
Auto Body Filler Applicator 9 pc
set
Body Filler Applicators
- Set of 9 assorted plastic and metal spreaders suit most
applications. The five 4 wide plastic spreaders with strengthing
rib... more
|
E-Z Store Door Alignment Tool
E-Z Store Door Alignment
Tool - Adjust sagging doors so they close properly with
the E-Z Store Door Alignment Tool. Heavy 1/4 steel construciton
with ... more
|
EZ Edger Tape Dispenser
Finally a way to ensure
a perfect soft transition edge between the painted (masked)
and unpainted portion of the job. The time saving EZ-Edger
precise... more
|
Lighted Button Head Bolts (2 pack)
Amber
Lighted Button Head
Bolts from DEI - These are 12 V straight lighted bolts made
from high grade stainless steel and polished to a mirror
finish. The l... more
|
Lighted Button Head Bolts (2 pack)
Purple
Lighted Button Head
Bolts from DEI - These are 12 V straight lighted bolts made
from high grade stainless steel and polished to a mirror
finish. The l... more
|
Lighted Button Head Bolts (2 pack)
Red
Lighted Button Head
Bolts from DEI - These are 12 V straight lighted bolts made
from high grade stainless steel and polished to a mirror
finish. The l... more
|
Lighted Button Head Bolts (2 pack)
White
Lighted Button Head
Bolts from DEI - These are 12 V straight lighted bolts made
from high grade stainless steel and polished to a mirror
finish. The l... more
|
Lite' N Boltz Polished License
Plate Kit
Struck by a Lite'n
Bolt Lite'n Bolts are illuminated stainless steel mounting
bolts that can be used in a multitude of locations on your
ride. A trick... more
|
Lite' N Boltz Satin (2 pack)
Struck by a Lite'N'Bolt.
Lite 'N'Bolts are illuminated stainless steel mounting bolts
that can be used in a multitude of locations on your ride.
A tri... more
|
Lite'N'Boltz Button Head Style
Satin Finish
Struck by a Lite'n
Bolt Lite'n Bolts are illuminated stainless steel mounting
bolts that can be used in a multitude of locations on your
ride. A trick... more
|
Panel Alignment Gauge
Make sure body panels
align properly before painting your car. This gauge will
help enhance the finished appearance by making sure all
the bolt on pan... more
|
Panel Gap Gauge (1/32" To 7/16")
In 1/32" Inc.
The Judge Eastwood's
exclusive panel gap gauge allows precise and accurate alignment
of hood, doors, fenders, decklids, etc., during final assembly
or... more
|
Profile Gauge 12"
When doing bodywork
and replacing panels, make sure the left is the exact same
shape as the right. Profile gauge accurately duplicates
shapes that are... more
|
Profile Gauge 18"
When doing bodywork
and replacing panels, make sure the left is the exact same
as the right. Profile gauge accurately duplicates shapes
that are almos... more
|
Profile Gauge 5 1/2"
When doing bodywork
and replacing panels, make sure the left is the exact same
shape as the right. Profile gauge accurately duplicates
shapes that are... more
|
Super Scraper Tool
Metal scrapers can
scratch and gouge expensive paint work and aluminum gasket
surfaces. This tough tapered plastic blade makes emblem
removal easy. Pl... more
|
Universal Rotating Parts Work Stand
Universal Rotating
Parts Work Stand holds body panels for easier panel repairs,
prep and painting large parts like bumper covers, fenders,
hoods doors... more
|
Autobody Patch Panel Video
Steel Patch Panel
Video. A step-by-step demonstration of forming steel sheet
metal with inexpensive hand tools. takes you from flat sheets
to installa... more
|
Bodywork Repair Welding Video Volume
3 of 4
An excellent choice
if you are considering the purchase of welding equipment!
Each of these four videos covers a different type of welding.
Volume I c... more
|
Bolt-Together Street Rods - Book
Builder's Guide to
Bolt-Together Street Rods - The wide range of body and suspension
kits available makes it easier than ever to build your own
street... more
|
Collector Car Restoration Video
Set
More hobbyists start
a restoration project than actually finish it. And most
projects that fail or get pushed aside fall behind because
of poor planni... more
|
Metal Fabricators Handbook
Carefully chosen for
clarity and content, this book is an invaluable resource
for anyone doing metalwork, from the beginner to the expert.
Generously ... more
|
Patchwork And Metal Finishing Video
The Patchwork & Metal
Finishing video features techniques for replacing corroded
section as well as preparing metal surfaces for paint. This
95 min vi... more
|
13 Piece Fiberglass Body and Fender
Tool Kit
Thirteen Piece Fiberglass
Body and Fender Set - This set includes one each of the
following: 31217, 31216, 31226, 31218, 31038, 31037, 31083,
31036, 3... more
|
7 Piece Body & Fender Set
Body Work Starter
Set - Here's an inexpensive way to get started doing your
own panel straightening. This 7-piece kit in molded plastic
case includes ... more
|
8 Piece Fiberglass Hammer & Dolly
Set
Eight Piece Fiberglass
Body and Fender Tool Kit - Includes one each of the following:
31216, 31226, 31036, 31039, 31063, 31032, 31072 (2 pieces)....
more
|
Bullseye Pick Replacement Tip Standard
Bullseye Pick Replacement
Tip Standard... more
|
Complete Hammer And Dolly Set 13
Piece
Complete Hammer and
Dolly Set A through L... more
|
Cross Bar Paintless Dent Repair
Kit
Remove Dents Without
Damaging Paint - Now there's an alternative to expensive
paintless dent repair systems and extensive training. This
new Dent-Out ... more
|
Cross Chisel Shrinking Hammer Model
153S
This high quality
tool manufactured by Martin Tools (originally manufactured
by Fairmount) is hand-ground and polished to the perfect
shape for bodywo... more
|
Doorskin Hammer Model #170G
This high quality
tool manufactured by Martin Tools (originally manufactured
by Fairmount) is hand-ground and polished to the perfect
shape for bodywo... more
|
Double End S-Spoon
S-Double End Dolly
- This S shaped dolly is used as a general purpose fender
and frame spoon. Heavy duty design, provides further reach
on panels and ... more
|
Fiberglass Dinging Hammer
This high quality
tool manufactured by Martin Tools is hand-ground and polished
to the perfect shape for bodywork and balanced for ease
of use. Two di... more
|
Fiberglass Doorskin Hammer
This high quality
tool manufactured by Martin Tools is hand-ground and polished
to the perfect shape for bodywork and balanced for ease
of use. Use on... more
|
Fiberglass Finishing Hammer
These high quality
tools manufactured by Martin Tools are hand-ground and polished
to the perfect shape for bodywork and balanced for ease
of use. Str... more
|
FIBERGLASS HANDLE FOR ALL 12" HAMMERS
Replacement Fiberglass
Handle for Martin Hammers - Use this replacement handle
to replace broken handles on any of the Martin Body hammers
we sell. In... more
|
Fiberglass Shrinking Hammer
Shrinking Hammer with
Fiberglass Handle - The one inch square face works well
for getting into corners. The 1-1/4 round shrinking face
pulls the metal... more
|
File Holder Flexible With File
These high quality
tools manufactured by Martin Tools (originally manufactured
by Fairmount) are hand-ground and polished to the perfect
shape for bod... more
|
Flexible Flat Body File
Made from high grade
steel, these 14 body files feature 8 teeth per inch for
fast cutting with less material build-up. Fasten to the
(31052) solid map... more
|
General Purpose Body Dolly
These high quality
tools manufactured by Martin Tools (originally manufactured
by Fairmount) are hand-ground and polished to the perfect
shape for bod... more
|
General Purpose Dinging Hammer
Model 150G
This high quality
tool manufactured by Martin Tools (originally manufactured
by Fairmount) is hand-ground and polished to the perfect
shape for bodywo... more
|
Hammer And Dolly Set 8 Pieces
Professional Basic
Hammer and Dolly Set - This 8 piece set contains some of
our most popular metal working tools including the (31033)
General Purpose... more
|
HICKORY HANDLE FOR MARTIN TOOL
BODY HAMMER
These high quality
tools manufactured by Martin Tools (originally manufactured
by Fairmount) are hand-ground and polished to the perfect
shape for bod... more
|
Light Dinging Spoon Model #1036
This high quality
tool manufactured by Martin Tools (originally manufactured
by Fairmount) is hand-ground and polished to the perfect
shape for body w... more
|
Light Duty Toe Dolly
Light Duty Toe Dolly
- Weighs 1-1/2 lbs., and measures only 9/16 thick. This
dolly is ideal for tight areas. Overall length is 4-5/8
width is 2-3/8. M... more
|
Light Weight Wedge Dolly
Light Weight Wedge
Dolly - This comma shaped dolly measures 2-7/64 x 2-1/2
x 4-27-64 and weighs 2.7 lbs. The tapered shape works well
between closely ... more
|
Long Curved Body Spoon Model #1054
This high quality
tool manufactured by Martin Tools (originally manufactured
by Fairmount) are hand-ground and polished to the perfect
shape for bodyw... more
|
The Skinner Door Panel Installation
Tool
Install Door Skins
with THE SKINNER? - For a professional installation. Hardened
steel guide and forming wheels work door skin from a 75-degree
angle ... more
|
Tiger Hair
Tiger Hair is the
high-strength, waterproof body filler. Fortified with long
strands of fiberglass. Apppropriate for bridging gaps. Sold
in a 12-lb. g... more
|
Tinning Butter 1 lb Jar
Just brush on and
heat the metal. This flux is made of premium 50% tin powder
that bonds to the metal when heated with an ordinary propane
torch. Leav... more
|
Toe Dolly Model #1058
These high quality
tools manufactured by Martin Tools (originally manufactured
by Fairmount) are hand-ground and polished to the perfect
shape for bod... more
|
Trunk/Floor Repair Kit
Rust perforation can
require extensive disassembly to remove fuel, brake and
electrical lines for a welded repair. In non-structural
areas, a fibergla... more
|
Twist Hammer
The striking face
has teeth in a swirl pattern, which grab the stretched metal.
When you strike with the hammer, an internal cam rotates
the head for ... more
|
Universal Rotating Parts Work Stand
Universal Rotating
Parts Work Stand holds body panels for easier panel repairs,
prep and painting large parts like bumper covers, fenders,
hoods doors... more
|
Utility Pick Hammer
Utility Pick with
Wooden Handle - Blunt pick offers gentler panel raising.
The 1-1/2 diameter low crown round face works well for smoothing
and stretc... more
|
Wet Wedge Attachment Pad 2 Pack
5 inch
Water Fed Sanding
System - Take the water with the sanding block with the
unique Wet Wedge system. The 10' water feed hose with flow
adjustment valve ... more
|
Wet Wedge Sanding Block 5-1/4 inch
Water Fed Sanding
System - Take the water with the sanding block with the
unique Wet Wedge system. The 10' water feed hose with flow
adjustment valve ... more
|
Wet Wedge Sanding Kit
Water Fed Sanding
System - Take the water with the sanding block with the
unique Wet Wedge system. The 10' water feed hose with flow
adjustment valve ... more
|
Wet Wedge Soft Block 5 inch
Water Fed Sanding
System - Take the water with the sanding block with the
unique Wet Wedge system. The 10' water feed hose with flow
adjustment valve ... more
|
Z Grip Skim Coat Body Filler 1
Gallon
Fast Sanding Body
Filler - This general purpose light weight polyester body
filler is excellent for applying thin skim coats of filler
over larger are... more
|
OTC Tech-2 Flash 32Mb Deluxe Set
Closeout.com
OTC Tech-2 Flash 32Mb Deluxe Set This is exactly the same
as the No. 3628, except you also get the aftermarket 3-in-1
PC card with data stream diagnostics for older ’81-’91 GM,
’83-’97 Ford, and ’84-’97 Chrysler vehicles; as well as one
Ford, three Chrysler adapter cables. This set also includes
a special adapter from the Tech 2 Flash to OTC adapter cables.
|
Ammco Symmetric Low Ceiling 2-Post Lift 9,000 lbs.
Closeout.com
Ammco® Symmetric Low Ceiling 2-Post Lift 9,000 Lb. For shops
where ceiling height is a concern, the S2900L's base plate
design offers lower height requirements with plenty of lifting
power. Features: 9,000 lb. capacity. Symmetric vehicle loading.
Ruggedly designed for 10' ceiling applications. 10 angle roll-formed
columns for strength and rugged durability. Full contact spherical
grooved greasable arm pin sleeves for less wear and longer
life. Zinc/Nickel plated arm pins. Cassette gear style arm
restraints. Cable equalization with brass bushing steel pulleys
for low maintenance and longer life. Mechanical safety locks
at 16 positions with single point release and two hand lift
lowering for fast and safe operation. Truck adapters included
as standard equipment. ALI/ETL Certified. Available in Red
or Blue. Comes standard as 220V Single Phase.
|
RTI Technologies-R12 RRV & Analog Charging Unit
Closeout.com
RTI Technologies-R12 RRV & Analog Charging Unit Automatic
Recovery and Recycling. Fan-Cooled Condenser for Maximum Speed
Even at High Temperatures. Vacuum Pump for TC670V (>29.5"
Hg). Double-Duty Compressor for TC670E (>28.0" Hg). Fast,
Accurate Analog Charging. Charging Cylinder is Heated and
Provides Air-Free Charge.
|
Coats High Volume Computer Wheel Balancer
Closeout.com
Coats-High Volume Computer Wheel Balancer The High Volume
Tire Balancer Solution• The Model 1025 Balancer is designed
to handle tough jobs. And lots of them.• The 1 1/2 horsepower
direct-drive motor and 16-bit microprocessor provide super-fast
five second cycle times in each of eight separate modes. In
addition to static and dynamic modes, the 1025 also provides
RV and four different alloy modes, plus match mount capability.
• Electronics adjust for three parameters: tilt axis, rotation
in horizontal axis, and vertical adjustment. The direct drive
motor requires less calibration than belt systems, and the
automatic calibration process is simple. Specifications: Tire
diameter: Up to 35" Rim width: 2" to 19.9" Rim diameter: 8"
to 29.9" Maximum tire weight: 110 lbs. Resolution: /-0.01
oz., /-1.4 degrees Accuracy: To 0.10 oz. Motor: 1/2 HP Power
requirements: 110VAC, 50/60 Hz, 1 Phase, Fused @ 15 Amps
|
Bright Solutions Scangas 5000 Kit w/ 5-Gas Analyzer and Case
Closeout.com
Bright Solutions-Scangas 5000 Kit w/ 5-Gas Analyzer & Case
Five-gas measurements: CO, HC, CO², O², and NOx. Performance
and diagnostic testing of Gasoline (petrol), Alcohol, Compressed
Natural Gas (CNG), or Liquified Petroleum Gas (LPG) engines.
Portable, ideal for on-road-testing as well as pre and post
inspection checks. Repair grade instrument, approved by Ford
of Europe. Warm-up as fast as one minute. Flight recorder
capability captures 490 screens of data with up to 80 minutes
of recording time. Serial and parallel ports for data download.
Choice of display in air/fuel ratio or Lambda value. Built-in
calibration software. Multiple help screens. Powered by host
vehicle 12 volt supply. Standby mode. Facility for four languages
(defaults to English). Complete with sample probe assembly.
Includes carrying case. Custom print header allowing workshop
details to be entered on printout.
|
Robinair Dual Refrigerant Recovery/Recycling
Closeout.com
Robinair Dual Refrigerant Recovery/Recycling Specifications:
Automatic operation – R-12 and R-134a. Two built-in manifolds,
tanks, compressors and scales so there’s no need to clear
or switch tanks. Readouts in English, French, German, and
Spanish. Design certified by UL to meet SAE J-2210 and J-1990
|
T-Tech Transmission Service Transmission ATF Exchange System-110
Volt AC
Closeout.com
T-Tech Transmission Service Transmission ATF Exchange System-110
Volt AC The finest name in ATF exchange just got even better.
Like its predecessors, the TT500 utilizes the revolutionary
T-Tech process to exchange virtually 100% of the vehicle's
transmission fluid. This top-of-the-line unit features a backlit
fluid cylinder to show the benefits of ATF exchange. The vehicle's
own transmission regulates the exchange process guaranteeing
that proper pressure and fill are maintained. An on-board
pump speeds cylinder filling. The new TT500 features a rugged
new roto-molded case design, upgraded internal plumbing connections,
a drip tray for hoses to reduce ATF drips, enhanced storage
space and side pocket for storage of manuals. Auto-alignment
for fast and easy hookups. Auto-bypass mode when service is
completed means the machine can be left unattended. Brightly
back-lit cylinder to easily monitor the exchange process and
drive home benefits of ATF exchange. Includes standard and
special fittings. Leak-free, dry break quick connect couplers.
Drain pan feature to conveniently drain transmission pan.
Specifications: Cylinder Pump Power Input: 110 Volt Fluid
Capacity: 18 Quart Number of Fittings Included: 34 Auto-Alignment:
Yes Auto-Bypass: Yes Back-lit Fluid Cylinder: Yes
|
International Tool Boxes 60" 12 Drawer Super Heavy Duty Tool
Cabinets w/ Roller Bearing Slides-Black
Closeout.com
International Tool Boxes® 60" 12 Drawer Super Heavy Duty
Tool Cabinets w/Roller Bearing Slides-Black 12 Drawer Super
Duty Cabinet with roller bearing slides. Available in red,
black or blue. Powder coat paint for superior scratch and
chemical resistance. Specifications: Slides: Double 220# (8”
& Full Width Drawer) Double 120# (12” Drawer). Heavy Duty
6” Spring Loaded Casters. Lock: High Security Tubular Key
Design. Dimensions: 60"W x 24"D x 47-5/8"H. Weight: 450 lbs.
Storage Capacity: 34656 cubic inches
|
International Tool Boxes 60" 12 Drawer Super Heavy Duty Tool
Cabinets w/ Roller Bearing Slides-Blue
Closeout.com
International Tool Boxes® 60" 12 Drawer Super Heavy Duty
Tool Cabinets w/Roller Bearing Slides-Blue 12 Drawer Super
Duty Cabinet with roller bearing slides. Available in red,
black or blue. Powder coat paint for superior scratch and
chemical resistance. Specifications: Slides: Double 220# (8”
& Full Width Drawer) Double 120# (12” Drawer). Heavy Duty
6” Spring Loaded Casters. Lock: High Security Tubular Key
Design. Dimensions: 60"W x 24"D x 47-5/8"H. Weight: 450 lbs.
Storage Capacity: 34656 cubic inches
|
International Tool Boxes 60" 12 Drawer Super Heavy Duty Tool
Cabinets w/ Roller Bearing Slides-Red
Closeout.com
International Tool Boxes® 60" 12 Drawer Super Heavy Duty
Tool Cabinets w/Roller Bearing Slides-Red 12 Drawer Super
Duty Cabinet with roller bearing slides. Available in red,
black or blue. Powder coat paint for superior scratch and
chemical resistance. Specifications: Slides: Double 220# (8”
& Full Width Drawer) Double 120# (12” Drawer). Heavy Duty
6” Spring Loaded Casters. Lock: High Security Tubular Key
Design. Dimensions: 60"W x 24"D x 47-5/8"H. Weight: 450 lbs.
Storage Capacity: 34656 cubic inches
|
Viper Service Centers-Semi-Automatic R134a A/C
Closeout.com
Viper Service Centers-Semi-Automatic R134a A/C Primary Input
- 120 Volt, Single Phase, 60 Hz Service Modes - R/R/E/R Service
Types - Semi-Automatic Refrigerant Type - R-134a Vacuum Pump
- 5 CFM Oil Seperation - Automatic Oil Injection - Manual
Air Purge - Manual Cylinder - 50 lbs.
|
RTI Technologies-R134a Auto & Prog 7cfm Vac Pump
Closeout.com
RTI Technologies-R134a Auto & Prog 7cfm Vac Pump The Most
Productive Dual A/C Service Unit! Recover, Recycle, and Recharge
Service Times Average Less Than 10 Minutes the Quickest in
the Industry! Patented Recovery/Recycling Process-Heavy-duty
compressors with true single-pass technology system for maximum
throughout. Large Fan-Cooled Condensers-Speed recovery, especially
when temperatures are high and A/C service is in demand. Rapid
Deep Vacuum-RHS2780V 7 CFM vacuum pump. Integrated Oil Charge-Fast,
easy method for oil charge. Digital Heated Charge-Programmable
with heat belts. Refills most vehicles in less than 45 seconds.
Quick-Fill-Automatically fills internal cylinders so you will
be ready for next vehicle. Recover from Both Sides of Vehicle.
Advanced Microprocessor-Allows you to program vacuum time,
leak test, charge amount, etc. And walk away. Pressure Detection
Devices-Automatically restarts compressors if residual refrigerant
is detected. Single-Pass Rapid Air Purge-Quickly eliminates
non-condensable gases. Internal Weight Scales-Industrial-strength
scales with shock absorbers eliminate inaccuracies and frequent
calibration issues. Mounted Components-Weight scales measure
cylinders and all refrigerant-bearing components to provide
accurate measurement of refrigerant recovered from and charged
to vehicle. Refrigerant Inventory-Accurate, continuous tracking
of recovered, recharged, and available refrigerant. Long term
memory for cumulative refrigerant anagement. Digital Readout-Easy
to understand. Plain language information and technician prompts.
No tutorial needed. So easy it makes any technician an A/C
expert. Easy Switchover-Instantaneous change between R12 and
R134a-no waiting! Pressure Protection-Suction pressure regulators
protect compressors and other critical components. Durable
Components-Powder-coated steel cabinet and the highest quality
compressors, solenoids, circuit board, switches, wiring, filters,
weight scales. Field Proven Reliability-RTI A/C machines are
the choice of the world? largest service chains and tens of
thousands of satisfied customers around the world. Specifications:
Electrical : 120V AC 60Hz (230V available) Dimensions : 47"H
x 30"W x 31.5"D (119 cm x 76 cm x 80 cm) Weight : 347 lbs.
(158 kg) Operating Range : 32?to 122? (0?to 50?) Scale Accuracy
: ?.03% load cell accuracy over useable range Hoses : 11 foot
(3.35 m) Compressors : 1/3 HP (.25 kW), pressure protected,
balanced startup Condensers : 2270 sq. in. (14645 sq. cm)
fin surface area, .38" (.97 cm) diameter copper tubing Condenser
Fans : 5 blade, 8" (20.3 cm) diameter, 1550 RPM Vacuum : RHS2780V
- 7 CFM, 29.9" Hg (0.033 mbar) (25 micron) Charging Cylinders
: 30.0 lbs. (13.6 kg) DOT Cylinder Heaters : Heat belt; 200
Watt Process Time : <10 minutes average, recover/recycle/recharge
Warranty : Manufacturer's 5 years parts; 2 years labor
|
RTI Technologies-R12 RRV & Digital Charging Unit
Closeout.com
RTI Technologies-R12 RRV & Digital Charging Unit The Most
Productive Dual A/C Service Unit! Recover, Recycle, and Recharge
Service Times Average Less Than 10 Minutes the Quickest in
the Industry! Patented Recovery/Recycling Process-Heavy-duty
compressors with true single-pass technology system for maximum
throughout. Large Fan-Cooled Condensers-Speed recovery, especially
when temperatures are high and A/C service is in demand. Rapid
Deep Vacuum-RHS2780V 7 CFM vacuum pump. Integrated Oil Charge-Fast,
easy method for oil charge. Digital Heated Charge-Programmable
with heat belts. Refills most vehicles in less than 45 seconds.
Quick-Fill-Automatically fills internal cylinders so you will
be ready for next vehicle. Recover from Both Sides of Vehicle.
Advanced Microprocessor-Allows you to program vacuum time,
leak test, charge amount, etc And walk away. Pressure Detection
Devices-Automatically restarts compressors if residual refrigerant
is detected. Single-Pass Rapid Air Purge-Quickly eliminates
non-condensable gases. Internal Weight Scales-Industrial-strength
scales with shock absorbers eliminate inaccuracies and frequent
calibration issues. Mounted Components-Weight scales measure
cylinders and all refrigerant-bearing components to provide
accurate measurement of refrigerant recovered from and charged
to vehicle. Refrigerant Inventory-Accurate, continuous tracking
of recovered, recharged, and available refrigerant. Long term
memory for cumulative refrigerant management. Digital Readout-Easy
to understand. Plain language information and technician prompts.
No tutorial needed. So easy it makes any technician an A/C
expert. Easy Switchover-Instantaneous change between R12 and
R134a-no waiting! Pressure Protection-Suction pressure regulators
protect compressors and other critical components. Durable
Components-Powder-coated steel cabinet and the highest quality
compressors, solenoids, circuit board, switches, wiring, filters,
weight scales. Field Proven Reliability-RTI A/C machines are
the choice of the world? largest service chains and tens of
thousands of satisfied customers around the world. Can be
converted to R134a in the future with an RTI conversion kit.
Specifications: Electrical : 120V AC 60Hz (230V available)
Dimensions : 47"H x 30"W x 31.5"D (119 cm x 76 cm x 80 cm)
Weight : 347 lbs. (158 kg) Operating Range : 32?to 122? (0?to
50?) Scale Accuracy : ?.03% load cell accuracy over useable
range Hoses : 11 foot (3.35 m) Compressors : 1/3 HP (.25 kW),
pressure protected, balanced startup Condensers : 2270 sq.
in. (14645 sq. cm) fin surface area, .38" (.97 cm) diameter
copper tubing Condenser Fans : 5 blade, 8" (20.3 cm) diameter,
1550 RPM Vacuum : RHS2780V - 7 CFM, 29.9" Hg (0.033 mbar)
(25 micron) Charging Cylinders : 30.0 lbs. (13.6 kg) DOT Cylinder
Heaters : Heat belt; 200 Watt Process Time : <10 minutes average,
recover/recycle/recharge Warranty : Manufacturer's 5 years
parts; 2 years labor
|
OTC Genisys Pathfinder 2004 Scan, Scope & Infotech Software
Kit
Closeout.com
OTC Genisys Pathfinder 2004 Scan, Scope & Infotech Software
Kit Includes Genisys scan tool, Pathfinder 2004 with Repair-Trac
and Fast Fixes, Asian 2003 and ABS / Air Bag 2002 software,
cartridge reader, manuals, adapters, and domestic vehicle
cables for GM, Ford, Chrysler, Jeep, Saturn, and OBD II enhanced,
a 4-channel Lab Scope Module with 4 DMM leads, ground lead,
kV conventional ignition lead, GM HEI ignition adapter, ignition
sync lead, manual, InfoTech Smart Card, and case. (Asian OBD
I cables not included; see Kit No. 3421-45.)
|
Robinair Transmission Fluid Exchanger
Closeout.com
Robinair Transmission Fluid Exchanger Robinair’s new transmission
oil exchanger has the vehicle in and out of the service bay
in less than 20 minutes! Our unique approach to exchanging
fluid... through the transmission oil dipstick! Features:
No rusty fittings to break loose. Easy, convenient, and no
damage to other engine components. Exchange oil in the pan
before it passes through the transmission filter. It cannot
be hooked up backwards. Three modes of operations dipstick
only, cooler line or a combination of the two! Exchange accuracy
approximately / - 1/4 qt. 32-quart supply tank; 34-quart waste
tank. Unprecedented one-tenth quart flow metering for adding
or subtracting fluid from the pan. Complete set of cooler
line adapters for most foreign and domestic vehicles. Works
with all types of automatic transmission fluid. Integral performance
designed hose and tool compartment with drain. Top-off feature.
Add or subtract in 1/10 qt. increments. “Low Fluid Alarm”
and “Indicator Light” to alert operator. “Drain Waste” feature
automatically pumps used fluid from the machine into a waste
oil container. “Drain Pan” feature drains the pan for easy
filter replacement. No mess.
|
|
|
|
