Blackhawk Automotive P350 2 Speed Hand Pump - 20cu

Internal pressure relief valve for over load protectionExternal load release valve for single acting cylinder usageLarge oil capacities to power a wide range of cylinders and tools

OMEGA Lift Equipment 55101 - 10k PSI Air Hand Pump

Safety overload protection mechanism to prevent ram and cylinder from damageProvide quick effortless lifts of rated capacity loads Requires only 90 PSI air pressureReservoir capacity - 600 c.c.

OMEGA Lift Equipment 65123 12 Ton Bench Press with Hand Pump

" -Excellent for bending, bonding or straightening applications -Heavy-duty return springs for fast ram return -Multi-position bed for work height adjustment -Heavy steel welded construction "

OMEGA Lift Equipment 60123 12 Ton Shop Press with Air Hand Pump

#NAME?

OMEGA Lift Equipment 60253 20 Ton Shop Press with Hand Pump

#NAME?

Milwaukee 48-59-2801 28V Lithium-Ion 1-Hour Battery Charger

" -One-hour charger charges the complete V28 Lithium-Ion cordless system of tools. Encapsulated electronics provide extreme durability and the pass-through plug keeps outlet space open. High visibility LED's display state of charge while charging. Bulk item only, does not come with original packaging. "

Milwaukee 48-11-1833 Battery and Charger Combo Kit

"V-technology lithium-ion batteries provide fade-free power until the end of discharge. The last cut feels as powerful as the first to increase productivity per battery discharge. Up to 50% longer run-time than 18-volt NiCd batteries. Superior cold weather operation allows near full run-time performance down to -4 degrees Farenheit. The Industry's only 5-year/2000-charge Warranty. These batteries are as light as a 14.4-volt NiCd battery and can be recharged at any time without reducing capacity. They're also backwards compatible with older NiCd tools! The concave battery latches provide improved grip while removing the battery fuel gauge button for improved accessibility. Dual- chemistry charger charges both lithium-ion and NiCd batteries from 18 to 28 volts. Charge Time is 1 hour for lithium-ion and 40 minutes for NiCd. NiCd packs will actually charge 20 minutes faster on the new Universal Charger but Milwaukee li-ion batteries do not need top-off conditioning due to their built-in Performance Optimizing Circuit, which constantly maintains cell balance. Milwaukee's V-technology charger delivers an optimal charge current over a 117 degree range (32 to 149 degree Farenheit). Conversely, Milwaukee's NiCd charger has a smaller 72 degree range. Automatic temperature monitoring continually monitors the battery's temperature and deliverers the appropriate charge current for that temperature. The Progressive Charge Indication battery's LED lights up incrementally as the battery is charged and provides quick indication of charge time. A pass-through plug conserves valuable outlet space and rubberized feet keep the charger in place while on slick surfaces. The Gray Terminal Block signifies dual-chemistry charging functionality and provides visual differentiation from 28-volt only charger (black terminal block)."

Bosch PB10-CD Factory Reconditioned 12V - 24V Battery Charger / Radio with CD Player

"The Bosch PB10-CD is a Factory Reconditioned 12V - 24V Battery Charger / Radio with CD Player. The heavy-duty 180 flexible rubber antenna boosts reception yet can still be folded to stay protected within the Power Box's protective roll cage. The remote controls channel, volume, CD player, mute, function and power and simply clicks into top magnetic storage on the Power Box. Best of all, the new and improved sound system delivers clearer, bolder sound from the jobsite radio due to more powerful amplifier, premium speakers, an upgraded sound board, individual bass and treble control, an upgraded volume control and improved anti-skip technology. The ergonomic design enables simple one-handed or gloved use. And the keychain attachment adds convenience while preventing loss. Advances in reception and sound continue to make the Power Box the best jobsite option."

Bosch BC130 30 Minute Single Bay Battery Charger

"The Bosch BC130 is a 30 Minute Single Bay Battery Charger. Bosch new advanced charging technology was designed with busy users in mind. The charger communicates with the sensor inside the battery to ensure optimal charge conditions are achieved. The system was developed alongside the new BLUECORE Battery Technology, but is also compatible with existing Bosch batteries."

Bosch BC230 30 Minute Dual Bay Battery Charger

"The Bosch BC230 is a 30 Minute Dual Bay Battery Charger. A Microprocessor measures internal battery conditions, optimizes energy flow and maximizes battery charge capacity. It Charges 9.6V to 24V batteries. A new charging indicator with 2 LEDs is easy to read and provides instant charging status of the batteries."

Makita DC18RA LXT Lithium-Ion 45-Minute Optimum Battery Charger

The Makita DC18RA is a LXT Lithium-Ion 45-Minute Optimum Battery Charger. The fast charging system charges Li-Ion 3.0 Ah battery in only 45 minutes. The built-in CPU gathers information from the battery's memory chip to determine optimum charging method. The forced air cooling fan cools the battery to minimize charging time. Its digital power display identifies the condition of the battery and charging condition.

Makita DC18SC LXT Lithium-Ion 45-Minute Optimum Battery Charger

"The Makita DC18SC is a LXT Lithium-Ion 45-Minute Optimum Battery Charger. Its charging technology controls current, voltage & temperature to maximize battery life. The central processing unit (CPU) analyzes data from the battery's memory chip. Forced air cooling fan cools the battery by forcing cool air through the battery's built-in air vents. It quickly charges an 18V 3.0 Amp hour Li-Ion battery in only 45 minutes."

Grip 38020 12V Automatic Battery Float Charger

"The Grip 38020 12V automatic battery float charger is used for the maintenance of wet or gel cell batteries that are stored or used periodically in such items as boats, cars, snowmobiles, ATVs and tractors. The float charger prevents self discharge of the battery, while maintaining and extending the life of rechargeable 12V batteries. It maintains a battery charge for batteries rated from 5 to 125 Amp-hours, by providing a constant (minimum current) 13.5 VDC regulated output. Other types of chargers provide a strong, rapid charge but tend to boil out liquids and decay electrodes."

Fein 9-26-04-077-01-3 Battery charger 9V - 18V

"-A Fein 9-26-04-077-01-3 Battery charger 9V - 18V-Battery charger, 9V - 18V, for all Fein Cordless Drills, Screwdrivers and Handy master Cordless Hammer Drill Batteries"

DeWalt DW9216BP 18V Battery and Charger Set - Accessory Only

"Charges all DeWalt 7.2V - 18V batteries (except Univolt batteries)Charges two batteries in 1 hour or less for less downtime3-stage charging system provides maximum run-time and extends overall life of the batteryThermal protection system for safe charging levels and longer battery lifeDiagnostics with 5 LED indicators for monitoring battery charge status: charged, charging, power line status, replace pack and battery temperature"

Porter-Cable 8924 9.6V -19.2V Battery Charger

"The Porter-Cable 8924 is a 9.6V - 19.2V Battery Charger. Designed to prolong battery life, the advanced diagnostic charger senses the condition of the battery before charging. If the battery is too hot or too cold to be charged without risking damage, the charger will wait until the battery is in the proper temperature range before charging. A green light flashes while the charger is waiting and then lights solid during charging. When the battery is fully charged, the light goes off and the charger switches to trickle-charge mode. The battery can be left on the charger and it will remain fully charged without overcharging. Also, a second indicator light will flash red during charging to indicate a battery that is getting weak or has been fully discharged. If the battery is nearing the end of its useful life, the red light will continue to blink during the charging cycle. When a battery needs to be replaced because it will no longer take a charge, both lights-red and green-will blink during charging."

Wesco Industrial 272228 Standard Compact Mail Cart

"-Ideal for carrying hanging files, mail, packages and tools-Removable baskets-1"" diameter, 18 gauge tubular construction-All metal surfaces for long life-Shipped KD-Upper basket - 25"" x 17.25"" x 11"", Lower basket - 25"" x 17.25"" x 7.5"", Overall size - 33"" "

Astro Pneumatic 8334 Heavy-Duty Plastic Utitlity Cart with Locking Lid

"-Shelf Plastic Cart with Locking Lid - Black Color-Hinged lid closes and locks with a standard padlock (lock not included)-For shop, office, warehouse or medical facility use-Has two handles on each side-Cart can be pushed or pulled from either side-Trays"

Astro Pneumatic 8201 Deluxe Welding Cart

"-Heavy duty steel construction-Heavy duty casters - 2 fixed & 2 swivel-3 shelves for easy access to supplies-Cart size: 28 (L) x 12 (W) x 28 (H)-Top shelf size: 17-1/2"" (L) x 11-1/2"" (W)-Bottom shelf size: 28"" (L) x 11-1/2"" (W)-Weight Capacity: 100lbs. Ap"

Astro Pneumatic 8330 Heavy-Duty Plastic Utitlity Cart

"-Heavy Duty Plastic 2 Shelf Utility Cart-For shop, office, warehouse or medical facility use-Has two handles on each side-Cart can be pushed or pulled from either side-Trays are 3-1/2"" deep and can hold up to 300lbs.-4"" swivel heavy duty casters-Tread wil"

"McCulloch FH160B Electric Pressure Washer 1600PSI, 1.7L/min., Induction Motor, Cart"

"Portable light duty, durable design120V industrial electric motor with thermo protectorHigh pressure hose and gue0.5L detergent injector kitConvenient inlet/outlet hose, quick connect systemAdjustable spray headLarge wheels for easy transportLong lasting three-axial piston, wobble-plate pumpWater pressure (psi): 1600, Electrical cord (length): 36', Flow rate (gpm): 1.63, High pressure hose: 20'"

Performance Mechanics' W54004 2-Shelf Utility Cart w/Locking Drawer

"-16 gauge steel construction-2 swivel casters-Shelf dimensions: 28"" X 16"" x 3-1/2"" deep"

"Wilmar W54006 Mechanic's Shop Cart with Tool Holder, Bins and Drawer"

"The Wilmar W54006 is a Mechanic's Shop Cart with Tool Holder, Bins and Drawer."

Performance W54005 Tough Truck Rolling Cart

-Rubber coated bed keeps your load in place -Four 5 wheels (2 fixed & 2 swivel) for maneuverability -Cushion grip handle folds down for storage

Wesco Industrial 272231 Large Mail Cart

"-Ideal for carrying hanging files, mail, packages and tools-Removable baskets-1"" diameter, 18 gauge tubular construction-All metal surfaces for long life-Shipped KD-Upper basket - 36"" x 17.25"" x 11"", Lower basket - 36"" x 17.25"" x 7.5"", Overall size - 43"" "

Wesco Industrial 272230 Deluxe Compact Cart

"-Ideal for carrying hanging files, mail, packages and tools-Removable baskets-1"" diameter, 18 gauge tubular construction-All metal surfaces for long life-Shipped KD-Upper basket - 25"" x 17.25"" x 11"", Lower basket - 25"" x 17.25"" x 7.5"", Overall size - 33.5"

Wesco Industrial 272233 Folding Table Top Cart

"-Folds for easy storage-Ideal for transporting instruments and office equipment-Laminate surface with vinyl edge-Four 4"" swivel casters, 1"" diameter, 18 gauge plated tubular construction-Lower basket - 21"" x 13"", Overall size - 28"" x 19"" x 28.75"", Table s"

Hobart Welders 194776 Welding Cart (Small) With Cylinder Rack for 500414 MIG Welder

"-Designed for use with #500414 (Handler 135 MIG welder), can also be used with most portable wire-feed welders-Heavy duty construction-Storage tray for cables and accessories-Accepts gas bottles up to 7"" diameter and 75 lbs"

Hobart 500535 Handler 140 Bonus Kit W/ Welding Hemet and Cart

"-Handler 140 Welder-Welds 24 gauge up to 1/4 inch in steel-Proven built-in wire feeder with quick-release drive roll lever-Built-in contactor eases use and is an excellent safety feature which makes wire electrically ""cold"" when not welding.-Four output v"

Hobart Welders 770270 Gas Welding Bottle Cart

"-Hobart Welders 770270 is a portable cart designed to carry up to two 9"" cylinders. It Includes large storage tray."

Hobart Welders 770187 Running Gear Welding Cart (Large) with Cylinder Rack

Hobart Welders 770187 is a Running Gear/Cylinder Rack for Hobart Mig Welders.

DeWalt DW7460 Heavy-Duty Mobile Base Cart

-Heavy-duty all metal construction -Quick foot action lock and release -Fits both 30" and 52" DeWalt Fence Rail Systems

TD Industrial 10322 Welding Cart with Solid Wheel

"Wheel Dia.: 8""2.5""Solid Height: 38-1/2"" Width: 19"" "

TD Industrial 10321 Heavy Duty Welding Cart with 20-3/4inch Wheels

"Wheel Dia.: 20""(500 mm) Pneumatic Length: 27-3/16""(690 mm) Width: 20"" (510 mm) Height: 47-3/4""(1215mm "