Howse Box Blade — 3-Point, Category 1, 5ft. Length

Reversible 1/2in. x 6in. high-carbon steel blade. Steel scarifiers have welded on, high-carbon teeth to break up compacted soils. Fits category 1 hitch, pins included. Truck Ship. U.S.A. Length: 5ft. # of Scarifiers: 5

Howse Landscape Rake — 3-Point, Category 1, 4ft. Length

Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Length: 4ft.

Howse Landscape Rake — 3-Point, Category 1, 8ft. Length

Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Length: 8ft.

Howse Landscape Rake — 3-Point, 7ft. Length

Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Length: 7ft.

Howse Landscape Rake — 3-Point, Category 1, 6ft. Length, Model# HLR72

Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Length: 6ft.

Howse Landscape Rake — 3-Point, Category 1, 5ft. Length, Model# HLR60

Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Length: 5ft.

Howse Grader Blade — 3-Point, Category 0-1, 6ft. Length, Model# MPH212

Moldboard has adjustable reverse and forward positions. Replaceable high-carbon steel cutting edge. Moldboard rotates 360° on a 3in. king pin. Can be offset 6in. from each side of the center. Cutting angle locks into position by a heavy duty 3/4in. pin. Easy, full swivel 1/2in. x 6in. reversible cutting edge. Side shift and tilt by loosening or removing 5 bolts. Category 1 and 0 hitch. Category 1 pins included. 3in. x 3in. steel frame. Truck Ship. U.S.A. Length: 6ft.

Howse Grader Blade — 3-Point, Category 0-1, 5ft. Length

Moldboard has adjustable reverse and forward positions. Replaceable high-carbon steel cutting edge. Moldboard rotates 360° on a 3in. king pin. Can be offset 6in. from each side of the center. Cutting angle locks into position by a heavy duty 3/4in. pin. Easy, full swivel 1/2in. x 6in. reversible cutting edge. Side shift and tilt by loosening or removing 5 bolts. Category 1 and 0 hitch. Category 1 pins included. 3in. x 3in. steel frame. Truck Ship. U.S.A. Length: 5ft.

Howse Grader Blade — 3-Point, Category 0-1, 4ft. Length

Moldboard has adjustable reverse and forward positions. Replaceable high-carbon steel cutting edge. Moldboard rotates 360° on a 3in. king pin. Can be offset 6in. from each side of the center. Cutting angle locks into position by a heavy duty 3/4in. pin. Easy, full swivel 1/2in. x 6in. reversible cutting edge. Side shift and tilt by loosening or removing 5 bolts. Category 1 and 0 hitch. Category 1 pins included. 3in. x 3in. steel frame. Truck Ship. U.S.A. Length: 4ft.

Howse Gearbox for M72 Rough Cut Mower — 75 HP, Model# 50PRC51147

75 HP gearbox for use on M72 rough cut mower. 1:1.47 gear ration 1 3/8in. smooth input shaft with 1/2in. shearpin hole 15-spline 2in. tapered output shaft

Howse Gearbox for M60 Rough Cut Mower — 55 HP, Model# 45PRC30147-N

55 HP gearbox for use on M60 rough cut mower. 1:1.47 gear ration 1 3/8in. smooth input shaft with 1/2in. shearpin hole 12-spline 1 1/4in. tapered output shaft

Howse Gearbox for M48 Rough Cut Mower — 55 HP, Model# 45PRC30193-N

55 HP gearbox for use on M48 rough cut mower. 1:1.93 gear ration 1 3/8in. smooth input shaft with 1/2in. shearpin hole 12-spline tapered output shaft

Howse Tow-Behind Disc Harrow for ATV

Cultivate soil, prepare seed beds and rake up dead foliage with your ATV and this disc harrow. Heavy-duty tubular frame, 1in. square disc axles and sealed ball bearings. Reversible gangs make it easy to fill in ruts. Ratchet adjustment for easy depth control. 1 7/8in. ball coupling hitch. Pneumatic tires. 1-year limited warranty. Truck ship. U.S.A. Rated for 300cc 4WD or larger ATVs Eight 16in. blades offer a 52in. cutting width Truck Ship Factory Shipped 1-year limited warranty U.S.A. Model ATVL862B

Howse Mower Chain Guard — 5ft. Length

Chain Guard made in U.S.A. 5 ft.

"Howse Landscape Rake — 3-Point, Category 1, 5ft. Length, Model# HLR60"

"Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A.Length: 5ft."

"Howse Landscape Rake — 3-Point, Category 1, 6ft. Length, Model# HLR72"

"Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A.Length: 6ft."

"Howse Rough Cut Mower — 3-Point, Category 1, 4ft. Length"

"3-point mowers include PTO driveline and rear swivel wheel. Heavy-duty bar cross braced frame, saucer shaped blade carrier, cast wheel hub 45 HP gearbox, 3-point category 1 hitch, segmented rubber wheel 35RN series drive shaft, 7 1/2in. sides, shearpin protection. Fit category 1 tractors. Chain guard sold separately. Truck Ship. U.S.A.Size: 4ft.Recommended HP: 15-30"

"Howse Landscape Rake — 3-Point, Category 1, 8ft. Length"

"Heat-treated 5/16in. x 1in. spring steel tines. 360° rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A.Length: 8ft."

Howse 3-Point Disc Harrow — 9ft. Width

"Extra rugged welded frame is constructed of 3in. square tubing. Harrows have ball bearings, 1 1/8in. square axles, 20in. notched blades, adjustable gangs and double U-bolted bearing hangers. Rear section floats — remains rigid or folds over front. U.S.A."

"Howse 3-Point Disc Harrow — 7 1/2ft. Width, Model# HT20022"

"Extra rugged welded frame is constructed of 3in. square tubing. Harrows have ball bearings, 1 1/8in. square axles, 20in. notched blades, adjustable gangs and double U-bolted bearing hangers. Rear section floats — remains rigid or folds over front. U.S.A."

"Howse Rough Cut Mower — 3-Point, Category 1, 5ft. Length"

"3-point mowers include PTO driveline and rear swivel wheel. Heavy-duty bar cross braced frame, saucer shaped blade carrier, cast wheel hub 45 HP gearbox, 3-point category 1 hitch, segmented rubber wheel 35RN series drive shaft, 7 1/2in. sides, shearpin protection. Fit category 1 tractors. Chain guard sold separately. Truck Ship. U.S.A.Size: 5ft.Recommended HP: 25-45"

"Howse Spike-Tooth Harrow — 3-Point, 5ft. Length"

Constructed of heavy-duty 3in. channel and 2in. x 2in. angle iron for long-lasting durability. Cultivates soil with 9in. x 3/4in. square spikes. Truck ship. U.S.A.

"Howse Box Blade — 3-Point, Category 1, 6ft. Length, Model# EB72"

"Reversible 1/2in. x 6in. high-carbon steel blade. Steel scarifiers have welded on, high-carbon teeth to break up compacted soils. Fits category 1 hitch, pins included. Truck Ship. U.S.A.Length: 6ft.Number of Scarifiers: 6"

Howse 3-Point Rotary Tiller — 54in. Width

Machine can be offset to either side or centered. A-frame extended for smooth operation. 2 disc torque limiter protects tractor and implement. Removable tine shaft. Heavy duty all gear drive, adjustable skid shoes, suggested use with 25-50 HP. 540 RPM at PTO shaft, 75 HP gear box. 28 13 1/4 in. L by 5/16 in. x 2 1/2 in. W blades, rotor speed of 210 RPM. Digs 7 in. to 10 in. deep. Works with category 1 tractors. Truck Ship. U.S.A. A-frame and gearbox assembly can be reversed 54 inches 3-Point Clutch, side shift 28 blades

King Kutter II Gear Driven Rotary Tiller — 6ft. Tiller Width, Model# TG-72-Y

King Kutter II gear-driven rotary tillers are designed to perform with its heavy-duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping or other jobs. This Category 1 tiller includes a PTO shaft with heavy-duty slip clutch. Available in 4ft., 5ft., and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks. U.S.A. Tiller Widt:: 6ft. Number of Flanges: 9 Blades per Flange: 6 Number of L-tines: 54 Requires 35-50HP Requires category 1 hitch Adjustable skids control cutting depth while rear shield controls soil mix 8in. maximum cutting depth Heavy-duty cast iron gearbox Heavy-duty gear drive for dependable performance Vented side gear box operates in oil bath 540 RPM PTO drive Shielded PTO shaft with slip clutch driveline protection Heavy-duty square tube reinforced frame with extra gussets Perfect for vegetable or hobby farmers, landscape contractors, municipal maintenance, nurseries and much more Model# TG-72-Y

King Kutter II Gear Driven Rotary Tiller — 5ft. Tiller Width, Model# TG-60-Y

King Kutter II gear-driven rotary tillers are designed to perform with its heavy-duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping or other jobs. This Category 1 tiller includes a PTO shaft with heavy-duty slip clutch. Available in 4ft., 5ft., and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks. U.S.A. Tiller Width: 5ft. Number of Flanges: 7 Blades per Flange: 6 Number of L-tines: 42 Requires 25-40HP Requires category 1 hitch Adjustable skids control cutting depth while rear shield controls soil mix 8in. maximum cutting depth Heavy-duty cast iron gearbox Heavy-duty gear drive for dependable performance Vented side gear box operates in oil bath 540 RPM PTO drive Shielded PTO shaft with slip clutch driveline protection Heavy-duty square tube reinforced frame with extra gussets Perfect for vegetable or hobby farmers, landscape contractors, municipal maintenance, nurseries and much more Model# TG-60-Y

King Kutter II Gear Driven Rotary Tiller — 4ft. Tiller Width, Model# TG-48

King Kutter II gear-driven rotary tillers are designed to perform with its heavy-duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping or other jobs. This Category 1 tiller includes a PTO shaft with heavy-duty slip clutch. Available in 4ft., 5ft., and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks. U.S.A. Tiller Width: 4ft. Number of Flanges: 6 Blades per Flange: 6 Number of L-tines: 36 Requires 20-35HP Requires category 1 hitch Adjustable skids control cutting depth while rear shield controls soil mix 8in. maximum cutting depth Heavy-duty cast iron gearbox Heavy-duty gear drive for dependable performance Vented side gear box operates in oil bath 540 RPM PTO drive Shielded PTO shaft with slip clutch driveline protection Heavy-duty square tube reinforced frame with extra gussets Perfect for vegetable or hobby farmers, landscape contractors, municipal maintenance, nurseries and much more Model# TG-48

King Kutter XB Rotary Tiller — 4ft., Model# TC-48-XB

King Kutters XB Rotary Tiller is designed for use with sub-compact tractors up to 25 HP. Adjustable shoes control cutting depth while rear shield controls soil mix. This tiller is a must for vegetable or hobby farmers, landscape contractors, nurseries and much more. U.S.A. Modified Category 1 subcompact attachment Cat 1 pin — Cat 0 spacing 48in. cutting width Maximum tilling depth of 5in. 4 tines per flange Slip-clutch protected drive line Cast iron center gear box Chain drive side gear box U.S.A. Model TC-48-XB